Road Renew is a polymer modified road coating material. It contains 71% waste mineral powder and is cold applied on any surface. After a short curing period, a 1mm thin membrane is created. This layer protects the surface and further rejuvenates it. The technology is patented under US patent laws.
Due to the negative effects of UV rays and water, roads usually lose all their positive properties in 2-3 years after the road is built. Seal coating the asphalt with Road Renew extends the service life of roads for 8-10 years or more, increases skid resistance, gives water and UV protection, and decrease road maintenance costs.
Road Renew has inherit characteristics that make it superior to traditional emulsified seal coating prodocuts: - Road Renew can be made entirely of environmentally friendly materials - Road Renew can be made in colors: black, grey, red, green, etc. - Due to high content of waste powder, Road Renew is considerably cheaper than competing products - Apart from asphalt road rejuvenation, Road Renew gives full water, UV rays and full chemical resistance protection (Alkaline substances, Salt solutions, Sulphuric Acid (40%), Nitric Acid (25%), Acetic Acid (70%), Hydrochloric Acid (30%), Phosphoric Acid (80%), etc). - Road Renew contains no water and forms a rigid bond with the road once fully cured. - Highly versitile: Road Renew can be modified and used for ports, stabilized soil roads, iron coating, concrete, anti icing, tack coating and more!
Road Renew's application rate is dependent on the road condition, and may vary from 700 grams to 1.2 kg per sqm. For stabilized soil road coating application expect to use between 1.5 to 2.0 kg per sqm.
Road Renew takes approximately, depending on the ambient temperature, 45 minutes to one hour to dry. The road can then be re-opened for traffic immediately.
All Rights Reserved | Road Soup® is a registered trademark of Road Soup LLC